Table 39: Required Setup Fields
Your ActionFieldSetup Wizard Page
Read the introduction page for
basic instructions on using the
setup wizard. Click Start to
continue.
Introduction
Configure System: Identification
Type the name of the services
gateway.
Hostname
Type the name of the network
or subnetwork to which the
services gateway belongs
Domain Name
Type the password that the
user root will use to log in to the
device.
Root Password (required)
Retype the root password.Verify Root Password
(required)
Configure J-Web Preferences
Specify the tab you want to
appear when J-Web starts.
J-Web starting page options
Specify when you want J-Web
to commit your configuration
changes.
J-Web commit options
Table 40: Optional Setup Fields
Your ActionFunctionField
Configure System:
Identification
Type the IP address of the
default gateway.
Default Gateway
Type the IP address of each
server that maintains
databases for resolving
hostnames and IP addresses,
and click Add.
DNS Name Servers
Type the IP address or domain
name of each domain that
includes the services gateway
to include it in a DNS search.
Domain Search
105Copyright © 2010, Juniper Networks, Inc.
Chapter 16: Performing Initial Software Configuration on the SRX210 Services Gateway
To Next Page
Loading...
