EasyManua.ls Logo

Juniper SRX210 - HARDWARE GUIDE REV 3 - SRX210 Services Gateway 3 G Expresscard Basic CLI Commands

Juniper SRX210 - HARDWARE GUIDE REV 3
190 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
You will encounter the first point of resistance when you begin to insert the 3G
ExpressCard. After you align the 3G ExpressCard, lift the card slightly and use firm
pressure to slide it into the slot.
When you have partially inserted the 3G ExpressCard, you will encounter the second
point of resistance. Use additional pressure to finish inserting the 3G ExpressCard
into the slot.
Related
Documentation
SRX210 Services Gateway 3G ExpressCard Overview on page 29
SRX210 Services Gateway 3G ExpressCard Basic CLI Commands on page 33
SRX210 Services Gateway 3G ExpressCard Basic CLI Commands
Table 16 on page 33 lists the basic CLI commands for operating the 3G ExpressCard on
the SRX210 Services Gateway.
The 3G wireless interface uses the prefix cl in the syntax cl-slot-number/0/port number.
Table 16: SRX210 Services Gateway 3G ExpressCard Basic CLI Commands
CommandAction
show modem wireless interface cl-0/0/8
show interfaces terse
Checks the status of the 3G ExpressCard.
CDMA ExpressCards
request modem wireless activate
request modem wireless activate iota cl-0/0/8
request modem wireless activate manual cl-0/0/8
msl MSL value mdn MDN value imsi IMSI value sid
SID value nid NID value sip-user-id SIP ID
sip-password SIP_PASSWORD
request modem wireless activate otasp cl-0/0/8
dial-string calling number
Activates the CDMA ExpressCard
IOTA Activates Internet-based over air
provisioning .
Manual activation Requires manual
entry of the required information.
OTASP Activates over the air service
provisioning.
GSM
request modem wireless gsm sim-unlock cl-0/0/8
pin
Unlocks the GSM SIM.
set interfaces cl-0/0/ 8 cellular-options gsm-options
sim-unlock-code
Unlocks the SIM automatically on reboot
request modem wireless gsm sim-unblock cl-0/0/8
puk new-puk-number pin new-pin-number
NOTE: You must obtain the PUK value from your
cellular service provider.
Recovers the SIM from the Pin Unlock Key
(PUK) state
When you attempt to unlock the SIM, if you
enter a wrong PIN three times in a row, the
SIM enters the PUK state.
33Copyright © 2010, Juniper Networks, Inc.
Chapter 3: SRX210 Services Gateway 3G ExpressCard

Table of Contents

Related product manuals