Juniper SRX210 - HARDWARE GUIDE REV 3 - SRX210 Services Gateway Power Supply

Figure 11: Airflow Through the Chassis (SRX210 Services Gateway with
Integrated Convergence Services Model)
Front
Rear
Air flow
FanFan
g031171
Related
Documentation
SRX210 Services Gateway Specifications on page 7•
• SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High
Memory, and PoE Versions) on page 10
• SRX210 Services Gateway with Integrated Convergence Services Front Panel and Back
Panel Views on page 12
• SRX210 Services Gateway Power Supply on page 25
SRX210 Services Gateway Power Supply
The power supply for the SRX210 Services Gateway is external. You must use the power
supply adapter provided by Juniper Networks to provide power to the services gateway.
Figure 12 on page 26 shows the label for the 48 V power supply.
25Copyright © 2010, Juniper Networks, Inc.
Chapter 2: SRX210 Services Gateway Hardware Components and Specifications