Table 19: SRX210 Services Gateway Integrated Convergence Services
Interoperability
DevicesPhone Types
•
Avaya 4600 and 9600 series
•
Polycom 300 and 500 series
•
Snom 300 series
•
Cisco Unified SIP phones 7960 and 7961
SIP phones
•
SNOM 360
•
Microsoft OCS client
•
X-Lite EyeBeam Mini-SIP
•
Avaya one-x
Softphones
Any analog device including the phones, FAX
machines, PBX or key systems, voice mail or
answering machine, and analog paging systems.
Analog devices
•
Avaya CM 5.2 with SES
•
Avaya ASM (Aura 1.x)
•
Microsoft OCS R1 and R2
•
Asterisk 1.6.x (Open Source)
SIP call servers
Related
Documentation
About the SRX210 Services Gateway with Integrated Convergence Services on page 39•
• Understanding the Functions of the SRX210 Services Gateway with Integrated
Convergence Services on page 41
• Configuring the SRX210 Services Gateway with Integrated Convergence Services on
page 43
Configuring the SRX210 Services Gateway with Integrated Convergence Services
To enable voice support on your SRX210 Services Gateway with Integrated Convergence
Services, you must configure the services gateway.
You can configure voice functionality using the Junos OS CLI or the J-Web interface.
For more information on configuring voice, see the Integrated Convergence Services
Configuration and Administration Guide for SRX210 and SRX240 Services Gateways.
Related
Documentation
• Understanding the Functions of the SRX210 Services Gateway with Integrated
Convergence Services on page 41
• SRX210 Services Gateway Integrated Convergence Services Interoperability on page 42
43Copyright © 2010, Juniper Networks, Inc.
Chapter 5: SRX210 Services Gateway with Integrated Convergence Services
To Next Page
Loading...
