Juniper SRX210 - HARDWARE GUIDE REV 3 - Appendix A Safety and Regulatory Compliance Information; SRX210 Services Gateway Definition of Safety Warning Levels

APPENDIX A
Safety and Regulatory Compliance
Information
This appendix includes the following topics:
•
SRX210 Services Gateway Definition of Safety Warning Levels on page 125
•
SRX210 Services Gateway General Safety Guidelines and Warnings on page 127
•
SRX210 Services Gateway Fire Safety Requirements on page 131
•
SRX210 Services Gateway Installation Safety Guidelines and Warnings on page 132
•
SRX210 Services Gateway Laser and LED Safety Guidelines and Warnings on page 136
•
SRX210 Services Gateway Maintenance and Operational Safety Guidelines and
Warnings on page 139
•
SRX210 Services Gateway Electrical Safety Guidelines and Warnings on page 144
•
SRX210 Services Gateway Agency Approvals on page 145
•
SRX210 Services Gateway Compliance Statements for EMC Requirements on page 147
•
SRX210 Services Gateway Compliance Statements for Environmental
Requirements on page 148
•
SRX210 Services Gateway Compliance Statements for Acoustic Noise on page 149
SRX210 Services Gateway Definition of Safety Warning Levels
This topic defines the following four levels of safety warnings used in Juniper Networks
technical publications:
NOTE: You might find this information helpful in a particular situation or
might otherwise overlook it.
CAUTION: You need to observe the specified guidelines to avoid minor injury
or discomfort to you or severe damage to the services gateway.
125Copyright © 2010, Juniper Networks, Inc.