Juniper SRX210 - HARDWARE GUIDE REV 3 - About this Guide; Audience; Documentation Conventions; Objectives

About This Guide
This preface includes the following topics:
•
Objectives on page xiii
•
Audience on page xiii
•
Documentation Conventions on page xiii
•
SRX Series Documentation and Release Notes on page xv
•
Obtaining Documentation on page xv
•
Documentation Feedback on page xvi
•
Requesting Technical Support on page xvi
Objectives
This guide describes hardware components and installation, basic configuration, and
basic troubleshooting procedures for the Juniper Networks SRX210 Services Gateway.
It explains how to prepare your site for services gateway installation, unpack and install
the hardware, power on the services gateway, perform initial software configuration, and
perform routine maintenance. After completing the installation and basic configuration
procedures covered in this guide, see the Junos OS configuration guides for information
about further Junos OS configuration.
Audience
This guide is designed for network administrators who are installing and maintaining a
Juniper Networks SRX210 Services Gateway or preparing a site for device installation.
To use this guide, you need a broad understanding of networks in general and the Internet
in particular, networking principles, and network configuration. Any detailed discussion
of these concepts is beyond the scope of this guide.
Documentation Conventions
Table 1 on page xiv defines the notice icons used in this guide.
xiiiCopyright © 2010, Juniper Networks, Inc.