EasyManua.ls Logo

Juniper SRX210 - HARDWARE GUIDE REV 3 - SRX210 Services Gateway Power Guidelines, Requirements, and Specifications; SRX210 Services Gateway Site Electrical Wiring Guidelines

Juniper SRX210 - HARDWARE GUIDE REV 3
190 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
APPENDIX B
SRX210 Services Gateway Power
Guidelines, Requirements, and
Specifications
This appendix includes the following topics:
SRX210 Services Gateway Site Electrical Wiring Guidelines on page 151
SRX210 Services Gateway Power Specifications and Requirements on page 153
SRX210 Services Gateway Grounding Specifications on page 153
SRX210 Services Gateway Site Electrical Wiring Guidelines
Table 45 on page 152 describes the factors you must consider while planning the electrical
wiring for the services gateway at your site.
CAUTION: It is particularly important to provide a properly grounded and
shielded environment and to use electrical surge-suppression devices.
CAUTION: For devices with AC power supplies, an external surge protective
device (SPD) must be used at the AC power source.
151Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Related product manuals