CHAPTER 12
Installing the SRX210 Services Gateway
This chapter includes the following topics:
•
SRX210 Services Gateway Safety Requirements, Warnings, and Guidelines on page 69
•
SRX210 Services Gateway Installation on page 69
•
Replacing or Installing Mini-Physical Interface Modules in the SRX210 Services
Gateway on page 78
SRX210 Services Gateway Safety Requirements, Warnings, and Guidelines
To avoid harm to yourself or the device as you install and maintain it, follow the guidelines
for working with and near electrical equipment, as well as the safety procedures for
working with devices. For a discussion of how to make the installation site a safe
environment along with a list of safety warnings, see Appendix A, Safety and Regulatory
Compliance Information.
NOTE: Providing an exhaustive set of guidelines for working with electrical
equipment is beyond the scope of this guide.
Related
Documentation
General Site Guidelines for Installing the SRX210 Services Gateway on page 51•
• Required Tools and Parts for Installing and Maintaining the SRX210 Services Gateway
on page 59
• Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation on page 65
SRX210 Services Gateway Installation
You can install the SRX210 Services Gateway in a rack, on a desk, or on a wall. The device
includes rubber feet for desk and wall mounting. The mounting brackets are optional
accessories.
69Copyright © 2010, Juniper Networks, Inc.
To Next Page
Loading...
