Table 3: SRX210 Services Gateway Models (continued)
Model NumberDevice TypeProduct Name
SRX210HHigh MemorySRX210 Services Gateway
SRX210H-TAAHigh Memory (TAA Compliant
)
SRX210 Services Gateway (TAA
Compliant)
SRX210H-POEHigh Memory with Power over
Ethernet (PoE)
SRX210 Services Gateway with
PoE
SRX210H-POE-TAAHigh Memory with PoE (TAA
Compliant )
SRX210 Services Gateway with
PoE (TAA Compliant )
SRX210H-P-MGWHigh Memory, PoE, and VoiceSRX210 Services Gateway with
integrated convergence services
All SRX210 Services Gateways run the Junos operating system.
Accessing the SRX210 Services Gateway
Two user interfaces are available for monitoring, configuring, troubleshooting, and
managing the SRX210 Services Gateway:
•
J-Web interface: Web-based graphical interface that allows you to operate a services
gateway without commands. The J-Web interface provides access to all Junos
functionality and features.
•
Junos OS command-line interface (CLI): Juniper Networks command shell that runs
on top of a UNIX-based operating system kernel. The CLI is a straightforward command
interface. On a single line, you type commands that are executed when you press the
Enter key. The CLI provides command Help and command completion.
Related
Documentation
SRX210 Services Gateway Specifications on page 7•
• SRX210 Services Gateway Hardware Features on page 4
SRX210 Services Gateway Hardware Features
Table 4 on page 4 lists the hardware features supported on the SRX210 Services
Gateway.
Table 4: SRX210 Services Gateway Hardware Features
SRX210
Services
Gateway with
Integrated
Convergence
Services
SRX210
Services
Gateway Power
over Ethernet
SRX210
Services
Gateway High
Memory
SRX210
Services
Gateway Low
MemoryFeature
1 GB1 GB1 GB512 MBDDR memory
Copyright © 2010, Juniper Networks, Inc.4
SRX210 Services Gateway Hardware Guide
To Next Page
Loading...
