• SRX210 Services Gateway with Integrated Convergence Services Front Panel and Back
Panel Views on page 12
• SRX210 Services Gateway LEDs on page 18
• SRX210 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 22
• SRX210 Services Gateway Cooling System on page 23
• SRX210 Services Gateway Power Supply on page 25
SRX210 Services Gateway LEDs
This topic includes the following sections:
•
Front Panel LEDs on page 18
•
Ethernet Port LEDs on page 20
•
Voice Interface Port LEDs on page 21
Front Panel LEDs
Figure 7 on page 18 shows the SRX210 Services Gateway front panel LEDs.
Table 11 on page 18 lists the LED indicators on the SRX210 Services Gateway front panel.
Figure 7: SRX210 Services Gateway Front Panel LEDs
Table 11: SRX210 Services Gateway Front Panel Components LEDs
UsageDescriptionComponent
The Alarm LED can be used
to gather information on
major or minor alarms or to
determine if the device is
functioning normally.
The Alarm LED has the following indicator colors:
•
Red and steadily on indicates a major alarm.
•
Amber and steadily on indicates a minor alarm.
•
Off indicates that the device is starting up.
NOTE: When the system is up and running, if the
Alarm LED is off, it indicates that no alarms are
present on the device.
Alarm LED
Copyright © 2010, Juniper Networks, Inc.18
SRX210 Services Gateway Hardware Guide
To Next Page
Loading...
