CHAPTER 9
Required Tools and Parts for Installing and
Maintaining the SRX210 Services Gateway
This chapter includes the following topic:
•
Required Tools and Parts for Installing and Maintaining the SRX210 Services
Gateway on page 59
Required Tools and Parts for Installing and Maintaining the SRX210 Services Gateway
Table 25 on page 59 lists the tools and equipments required to install and maintain the
SRX210 Services Gateway.
Table 25: Required Tools and Parts for Installing and Maintaining the
SRX210 Services Gateway
Related TopicTools and PartsTask
•
Installing the SRX210
Services Gateway in a Rack
on page 71
•
Installing the SRX210
Services Gateway on a Desk
on page 74
•
Installing the SRX210
Services Gateway on a Wall
on page 76
•
Phillips (+) screwdriver,
number 1
•
Tie wrap
Installing the SRX210 Services
Gateway
“Connecting the SRX210
Services Gateway to the
Power Supply” on page 79
Electrostatic discharge (ESD)
grounding wrist strap
Connecting the SRX210
Services Gateway
“Grounding the SRX210
Services Gateway” on page 82
Phillips (+) screwdriver,
number 1
Grounding the SRX210
Services Gateway
“Packing the SRX210 Services
Gateway and Components for
Shipment” on page 163
•
Blank panel to cover empty
Mini-PIM slot
•
Electrostatic bag or
antistatic mat, for each
component
•
Electrostatic discharge
(ESD) grounding wrist strap
Packing the SRX210 Services
Gateway
59Copyright © 2010, Juniper Networks, Inc.
To Next Page
Loading...
