Juniper SRX210 - HARDWARE GUIDE REV 3 - Page 132

The following examples provide the sample output of commands:
show chassis hardware
•
For the SRX210 Services Gateway
user@host > show chassis hardware
Item Version Part number Serial number Description
Chassis SRX210b
Routing Engine REV X0 750-021778 000000PS2627 RE-SRX210B
FPC 0 FPC
PIC 0 2x GE, 6x
FE, 1x 3G
Power Supply 0
show chassis hardware detail
user@host > show chassis hardware detail
Hardware inventory:
Item Version Part number Serial number Description
Chassis SRX210b
Routing Engine REV X0 750-021778 000000PS2631 RE-SRX210B
da0 999 MB ST72682 Nand Flash
usb0 (addr 1) DWC OTG root hub 0 vendor 0x0000 uhub0
usb0 (addr 2) product 0x6254 25172 vendor 0x058f uhub1
usb0 (addr 3) ST72682 High Speed Mode 64218 STMicroelectronics umass0
FPC 0 FPC
PIC 0 2x GE, 6x FE, 1x 3G
Power Supply 0
NOTE: The values given in the usb0 rows provide information for USB level
debugging. This information is about USB hub topology.
show chassis environment
user@host > show chassis environment
Class Item Status Measurement
Temp Routing Engine OK 33 degrees C / 91 degrees F
Fans SRX210 Chassis fan OK Spinning at intermediate-speed
Power Power Supply 0 OK
show chassis fpc
user@host > show chassis fpc
Copyright © 2010, Juniper Networks, Inc.114
SRX210 Services Gateway Hardware Guide