Table 5: SRX210 Services Gateway Specifications (continued)
ValueSpecification
•
SRX210 Services Gateway Low Memory model: 27
watts
•
SRX210 Services Gateway High Memory model: 28
watts
•
SRX210 Services Gateway PoE model: 34 watts
(excluding PoE load)
•
SRX210 Services Gateway with Integrated
Convergence Services model: 43 watts (excluding
PoE load)
Average power consumption
•
No performance degradation up to 10,000 ft (3048
m) for SRX210 Services Gateway Low Memory,
High Memory, and PoE models
•
No performance degradation up to 6561 ft (2000
m) for SRX210 Services Gateway with Integrated
Convergence Services)
Altitude
5% to 90%, noncondensingRelative humidity
Normal operation ensured in temperature range of
32°F (0°C) to 104°F (+40°C)
Nonoperating storage temperature in shipping
container: –40°F (–40°C) to 158°F (70°C)
Temperature
NOTE: These specifications are estimates and subject
to change.
•
SRX210 Services Gateway Low Memory: 120
BTU/hour
•
SRX210 Services Gateway High Memory: 126
BTU/hour
•
SRX210 Services Gateway with PoE: 164 BTU/hour
(Excluding PoE load)
•
SRX210 Services Gateway with Integrated
Convergence Services: 232 BTU/hour (Excluding
PoE load)
Maximum thermal output
70 dB(A) or less per EN ISO 7779Noise level
CAUTION: Beforeremoving or installingcomponents of a functioning services
gateway, attach an electrostatic discharge (ESD) strap to an ESD point and
place the other end of the strap around your bare wrist. Failure to use an ESD
strap could result in damage to the services gateway.
Related
Documentation
SRX210 Services Gateway Description on page 3•
• SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High
Memory, and PoE Versions) on page 10
9Copyright © 2010, Juniper Networks, Inc.
Chapter 2: SRX210 Services Gateway Hardware Components and Specifications
To Next Page
Loading...
