EasyManua.ls Logo

Kalmar DCE80-100E - Description; Overview

Kalmar DCE80-100E
317 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DCE80-100E
Technical Handbook
Engine TAD720VE
Description
20
P.Group 30
TDCE01
04GB
Overview
The TAD720VE engine is a 6-cylinder, inline, 4-stroke, low emis-
sion diesel engine with overhead valves. The engine is turbo-
charged, i.e. combustion air is supplied under pressure. As a
result, the quantity of fuel injected can be increased, which in-
creases the engine output. The turbocharger is driven by the ex-
haust gases and uses energy that would otherwise be lost.
In order to further increase the engine efficiency, the engine is
equipped with a air-to air intercooler.
The engine is pressure-lubricated by an oil pump which delivers
oil to all lubrication points. A full-flow oil filter effectively cleans the
lubricating oil. An integrated, side mounted oil cooler is cooling
the entire oil flow.
The fuel system is protected against impurities by replaceable fil-
ters.
To maintain a controlled working temperature in cylinders and
combustion chambers, the engine is provided with piston cooling.
The low emission engine has a new design of combustion cham-
ber, injection equipment and charge air cooler (intercooler) which
satisfy future emission requirements from both the USA (Califor-
nia) and Europe. The new engines represent a considerable im-
provement, not only in terms of exhaust gas emissions, but also
in terms of power and torque curves.
In addition, all Volvo engines comply with the R24 exhaust smoke
requirements.

Table of Contents

Related product manuals