DCE80-100E
Technical Handbook
General
6
P.Group 00
TDCE01
04GB
Applications
The Kalmar DCE80-100E is a range of trucks is based on an en-
tirely new approach to the design and production of heavy diesel-
powered trucks. The trucks are durable and safe and their acces-
sibility for service and maintenance is unexcelled.
The trucks are intended for handling of empty containers in har-
bours and container terminals with stacking up to 8 containers
high
Design – general survey
Kalmar DCE80-100E diesel trucks are of sturdy design for heavy
duty. They are built around a chassis which has high strength and
torsional stiffness and an extremely low centre of gravity.
The operator’s cab is provided with vibration isolation and sound
insulation and offers excellent all-round visibility.
The operator is provided with many facilities for adjusting his
seating attitude. The seat, backrest and springing of the opera-
tor’s seat can be adjusted in a wide variety of ways.
The engine is easily accessible through a casing.
The six-cylinder turbocharged engine combined with a three-
speed gearbox with torque converter, provides smooth power
whenever needed.
The drive axle with hub reductions, the oil-cooled hydraulic brake
system and the pendulum-mounted steered axle with double-act-
ing steering cylinder satisfy very strict demands on strength and
mobility when travelling on irregular surfaces.
The hydraulic system is reliable and has high performance
charged by two, three or four hydraulic pumps.
For further details, see group 70.
To Next Page
Loading...
