Kamstrup ULTRAFLOW 54 Series User Manual

ULTRAFLOW®54(H)/(J)
KamstrupA/S∙TechnicalDescription∙5512‐1554_J1_GB_04.2018
83
q
p
CCC
[m³/h] [imp/l] [l/imp] Divider DD [ms] [ms] (E=4) [ms] (E=5) [ms] (E=6)
40 158 5 3.9 ---Default
40 10 50 34 - 20 50 -
40 25 125 64 - - - 100
40 100 500 35 - - - 100
40 250 1250 65 - - - 100
60 170 2.5 3.9 ---Default
60 10 25 34 - 20 50 -
60 25 62.5 64 - - - 100
60 100 250 35 - - - 100
60 250 625 65 - - - 100
100 180 1.5 3.9
---
Default
100 101534 - 20 50 -
100 100 150 35 - - - 100
100 250 375 65 - - - 100
Meter factor Pulse duration
Table 29. Configuration variants of meter factor (DD) and pulse duration (E)
for Pulse Divider for ULTRAFLOW
®
54 and 34, qp 40…100.
Based on a q
p
-value one of the meter factor options for the Pulse Divider is selected from Table 27 or Table 29. The
pulse duration options appear from the same line as the selected meter factor.
Example: For ULTRAFLOW
®
54 with q
p
40 m
3
/h (5 imp/l, CCC=158) a pulse figure of 10 l/pulse (DD=34) for the Pulse
Divider is required. Based on this pulse figure you have the option of pulse durations 20 (E=4) or 50 (E=5)
milliseconds.
For older types of ULTRAFLOW
®
(e.g. ULTRAFLOW
®
type 65) which do not have the same direct and unique
connection between q
p
and meter factor (CCC), correct configuration can be ensured by starting from the meter
factor of the flow sensor [imp/l].
Default values in Table 27 and Table 29 indicate meter factors and pulse durations of ULTRAFLOW
®
54 and 34.

Kamstrup ULTRAFLOW 54 Series Specifications

General

Brand	Kamstrup
Model	ULTRAFLOW 54 Series
Category	Measuring Instruments
Language	English