OPERATOR'S STATION
1-41
Hazard Switch
IMPORTANT: Do not leave the hazard switch (1) in the
" " or "ON" position for a long time with the engine
stopped. The batteries will become discharged.
When a machine failure occurs, use this switch to inform other
vehicles that the machine is in an emergency situation.
When the "
" on hazard switch (1) is pressed, front and rear
turn signals (hazard light) (2) on both right and left sides start
flashing.
Press the opposite side of hazard switch (1) to turn the hazard
signals OFF.
M4GB-01-065
1
2
2
22
MNEC-01-037
1
MNEC-07-039
MNDB-07-013
To Next Page
Loading...