SAFETY
S-32
Avoid Heating Near Pressurized Fluid Lines
y Flammable spray can be generated by heating near
pressurized fluid lines, resulting in severe burns to yourself
and bystanders.
x Do not heat by welding, soldering, or using a torch near
pressurized fluid lines or other flammable materials.
x Pressurized lines can be accidentally cut when heat goes
beyond the immediate flame area. Install temporary
fire-resistant guards to protect hoses or other materials
before engaging in welding, soldering, etc.
Avoid Applying Heat to Lines Containing
Flammable Fluids
x Do not weld or flame cut pipes or tubes that contain
flammable fluids.
x Clean them thoroughly with nonflammable solvent
before welding or flame cutting them.
Precautions for Handling Accumulator and Gas
Damper
High-pressure nitrogen gas is sealed in the accumulator and
the gas damper. Inappropriate handling may cause explosion,
possibly resulting in serious injury or death.
Strictly comply with the following items:
x Do not disassemble the unit.
x Keep the units away from open flames and fire.
x Do not bore a hole, do not cut by torch.
x Avoid giving shocks by hitting or rolling the unit.
x Before disposing the unit, sealed gas must be released.
Consult your nearest Kawasaki dealer.
SA-030
To Next Page
Loading...