KCM 70Z7 - Resetting of Oil Change and Filter Replacement Intervals

OPERATOR'S STATION
1-30
Resetting of Oil Change and Filter Replacement Intervals
Reset oil change and/or oil filter replacement intervals as
needed:
y Hydraulic oil change interval hour meter
Oil change intervals can be reset to “4000.0”, “2000.0”, or
“1500.0”. The interval set when the machine was shipped
from the factory is “4000.0”.
While displaying the change interval hours, keep pressing
switch (1).

NOTE: When switch (1) is released, time resetting is
completed. Keep pressing switch (1) until the desired resetting
time is displayed.
Time display is changed four seconds after pressing switch
(1). While keeping switch (1) pressed, press switch (3). Each
time switch (3) is pressed, the displayed hours will change in
the order of “4000.0 J 2000.0 J 1500.0”. When the desired
time is displayed, release switch (1) to complete resetting
operation.
Keep pressing switch (1).
Remaining hours
before replacement
is displayed.
Release switch (1) to complete resetting operation.
Time display is changed four
seconds after pressing switch (1).
Alternate display
MNDB-01-008
32 1
Press button
Press button
Press button
MNDB-01-043