OPERATOR'S STATION
1-15
Hydraulic Oil Temperature Indicator (Red)
If the hydraulic oil temperature becomes higher than the
specification valve, the hydraulic oil temperature indicator
will light, the service indicator will light. Immediately stop
machine operation and wait for the hydraulic oil to cool before
continuing operation.
Transmission Oil Temperature Indicator (Red)
If the transmission oil temperature is kept higher than the
specification for a short period of time, both the transmission
oil temperature indicator and the service indicator come
ON. Immediately stop operation of the machine and run
the engine at low idle speed to reduce the transmission oil
temperature.
Axle Oil Temperature Indicator (Red)
If the axle oil temperature becomes higher than the
specification, both the axle oil temperature indicator and the
service indicator comes ON.
NOTE: If the brake pedal is continuously stepped on, an
increase of the axle oil temperature may result. Carefully
operate the brake pedal.
M4GB-01-026
M4GB-01-027
M4GF-01-005
To Next Page
Loading...