TRANSPORTING
6-2
Loading / Unloading on Trailer
WARNING: Be sure to use a loading dock or a ramp for
loading/unloading.
Always load and unload the machine on a firm, level surface.
Ramp/Loading Dock:
1. Before loading, thoroughly clean the ramps, loading
dock and flatbed. Dirty ramps, loading docks, and
flatbeds with oil, mud, or ice on them are slippery and
dangerous.
2. Chock (1) the truck and trailer wheels while using a ramp
or loading dock.
3. Ramps must be the right size and able to bear the load.
Be sure that the incline of the ramp is less than 15°.
4. Loading docks must be the right size and able to bear
the load. to support the machine and have an incline of
less than 15°.
11
10 to 15°
M4GB-06-001
M4GB-06-002
To Next Page
Loading...