OPERATOR'S STATION
1-48
High-Low Beam Switch
Shifts the headlight beam between high and low.
CAUTION: Travel the machine with the headlight in
the low beam position when other vehicles are present
in the vicinity.
By bringing down the signal lever (7) with the headlight
ON, the headlight beam turns upward, and the high beam
indicator (8) comes ON. By bringing up the signal lever (7), the
headlight beam turns downward, and the high beam indicator
(8) goes OFF.
7
8
MNDB-01-003
MNDB-01-008
To Next Page
Loading...