MAINTENANCE
7-10
Inspection/ Maintenance Access Side Cover
CAUTION:
y Always close side covers (1) during operation.
y Do not keep side covers (1) open on a slope or when
a strong wind is blowing. Failure to do so may be
dangerous because side cover (1) may unexpectedly
close.
y Take care not to pinch your fingers when opening/
closing the side covers (1).
y When side cover (1) is opened, the cover may move
suddenly. Be careful not to come in contact with the
cover.
y Before inspecting around the engine, be sure to
secure side cover (1) with holding rod (4).
y In case the machine is equipped with the fenders (2)
on side covers (1), never ride on the fenders (2).
When opening side cover (1), pull latch (3).
NOTE: When required to inspect the machine with side cover
(1) kept open, lock side cover (1) using the holding rod (4)
provided inside the side cover.
Side cover (1) has a holding groove. Engage the holding rod
(4) in the holding groove.
321
4
MNDB-01-014
MNDB-01-016
To Next Page
Loading...