OPERATOR'S STATION
1-90
Fuse Box
IMPORTANT: If a fuse blows, turn the key switch OFF.
After checking and correcting the cause of the trouble,
replace the fuse with a new one.
The slow blow fuses (1 and 2) function as a "safety valve" to
prevent excess current from flowing through, and to protect
the electrical system.
The fuse capacity varies depending on its corresponding
circuit. Be sure to replace the blown fuses only with the
specified one.
When checking fuses, check the fuse A, B and slow blow fuses
(1 and 2) in this order.
1- 140 A
2- 65 A
MNEC-01-047
Fuse Box A
Front
Attachment Side
Fuse Box B
MNEC-01-503
21
To Next Page
Loading...