OPERATOR'S STATION
1-105
Inspection/Maintenance Side Access Cover
CAUTION:
y Always close side covers (1) when moving and/or
operating machine.
y Do not keep the side cover open on a slope or when
a strong wind is blowing. Failure to do so may be
dangerous because the side cover may unexpectedly
move or close.
y Take care not to pinch fingers when opening/closing
side cover (1).
y As the side cover flips up by itself, care should be
taken not to be hit with the cover when opening it.
y Before checking around the engine, be sure to lock
the cover in position with locking rod (3) provided
inside the side cover.
y Never attempt to stand on fender (2) if side cover (1)
is provided with fender (2).
If the gas struts become weak, replace them
immediately.
NOTE: Lock the side cover in position with locking rod (3).
1 2
3
MNDB-01-014
MNDB-01-016
To Next Page
Loading...