OPERATING THE ENGINE
3-2
Check Points Check Contents
9. Chassis 1. Oil leaks of the transmission and the axle
2. Level, leaks and contamination of the fuel tank. Drain water from fuel
tank.
3. Level and leaks of the hydraulic oil tank
4. Operation, play and operating force of control levers and steering wheel
5. Operation of hydraulic equipment. Oil leaks and damage to piping and
hoses.
6. Deformation, damage, and abnormal noise of chassis parts
7. Washer fluid level
10. Loader 1. Oil leaks and damage to cylinders, pipe lines and hoses
2. Loose, worn and missing cutting edges
3. Wear and damage to the bucket
4. Lubrication of the loader parts
5. Damage to the pin lock bolts, stoppers and links
6. Loose and missing mounting bolts/nuts
11. Others 1. Operation of instruments, switches, lights and buzzer/horn
2. Damage and deformation to the ROPS cab
3. Abnormal outside appearance of machine
4. Looseness of the battery terminals
5. Wear, damage, and expiration date of the seat belt
6. Damaged to the steps and handrails
To Next Page
Loading...