KCM 70Z7 - Page 194

MOVING THE MACHINE
4-7
Shift Change Delay Mode
Pressing shift change delay mode switch (5) alternately
activates (ON) and deactivates (OFF) the shift change delay
mode.
When travel mode selector (4) is set in AUTO 1 or AUTO 2
while shift switch (3) is in 3rd range, 4th range or 5th range
position, the shift up timing in 2nd range J 3rd range is
delayed.
Loading work can be easily done in 2nd range position.
Shift Up Delay
Forward
movement
: The gear shifts up when moving the
machine at high speed in 2nd range for 4
seconds or longer. The gear will not shift
while the lift arm is raising. The forward shift
up delay will operate only one time when
the bucket is in the operating position.
When the bucket is lower at digging
position, the shift delay always operate.
Reverse
movement
: The gear shifts up when operating the
machine at high speed in 2nd range for 5
seconds or longer. The shift up delay always
operates.
MNDB-01-001
34
5
5
Press
MNDB-01-020
4
MNDB-01-024