MOVING THE MACHINE
4-13
Precautions for traveling
When operating, observe the previously noted operating
precautions along with the others shown below to ensure
safe and correct operation.
WARNING:
y In case a tire is punctured while driving, securely
hold the steering wheel and slowly reduce the drive
speed.
If the service brake is suddenly applied while a tire
is punctured, steering may lose control, possibly
creating an accident. Never apply the brake quickly if
a tire is punctured.
y Never mount or dismount a moving machine. Never
allow any personnel other than the operator to ride
on the machine when operating.
x Even after break-in is complete, avoid running the engine
at high RPM’s (min
-1
) under no load.
x If any abnormal condition such as an abnormal
noise, vibration, or smell is noticed while operating,
immediately stop the engine and inspect the machine for
any trouble.
x Avoid using sudden steering or braking as much as
possible because your machine and other machines may
become involved in a hazardous condition.
x Road speeds of this machine are lower than most
automobiles. Always give the right of way to automobiles.
x Make it a habit to periodically scan the gauges
and instruments. If any abnormality is recognized,
immediately stop the machine and check the machine for
the cause of the trouble.
x When required to drive on the road shoulder or in tight
spaces, use a signal person or signal car.
x Slowly approach a crossing while paying attention to the
visibility ahead and in the opposite lane.