OPERATING THE MACHINE
5-11
Auto Idling Stop
Operating condition
x The engine is running.
x The parking brake switch is ON.
x The forward/reverse lever (switch) is in neutral (N).
x The accelerator pedal is not depressed.
x The brake pedal is not depressed.
x The control lever is not operated.
x The steering wheel is not operated.
x Coolant, hydraulic oil and transmission temperature are
not high.
IMPORTANT:
yWhen the engine stops because of the auto idling
stop function, turn the key switch to ACC or OFF once
and then turn it to START to restart the engine. Do
not leave the machine after auto idling stop. This
may discharge the batteries.
yWhen the key switch is turned to OFF position while
the auto idling stop function is ON, the setting will
remain ON at the next startup.
Refer to "Auto Idling Stop" in the OPERATOR'S STATION chapter
for setting the auto idling stop function.
To Next Page
Loading...