MAINTENANCE
7-19
Recommended Hydraulic Oil
Kind of Lubricant Hydraulic Oil
Where to be applied Hydraulic System
Change Interval 4000 Hr 2000 Hr
Environmental Temp. -20 to +45 °C (-4 to 113 °F)
Kawasaki KCM Super EX 46HN
Idemitsu Kosan Super Hydro 46x
JX Nippon Oil &
Energy Corporation
SUPER HYRANDO WP46
Shell Tellus ST 46 (Tellus S3 V 46)
Exxon Mobil Mobil DTE 10 Excel 46
BP Bartran HV46
Castrol Hyspin HVI 46
Chevron RANDO Ashless 46HD
Others JCMAS HK VG46W
NOTE: Use proper hydraulic oil in accordance with the atmospheric temperature.
The machine shipped from the factory is filled with oil marked
.
When the atmospheric temperature is between -40 °C and +20 °C: Use the proper hydraulic oil having high and low
temperature characteristics by referring to the values shown below.
Low Temperature Viscosity: Less than 4000 cSt at -40 °C
High Temperature Viscosity: More than 6.5 cSt at +80 °C
The above values are approximately equivalent to ISO viscosity grade #22. However, low temperature viscosity will differ
depending on each product. Contact each hydraulic oil manufacture directly.
When the atmospheric temperature is below -40 °C: Contact your authorized dealer.
Recommended Coolant
Refer to page 7-69 for information.
To Next Page
Loading...