MAINTENANCE
7-28
6. Allow oil to drain through a clean cloth to check if any
foreign matters such as metal pieces are not in the oil.
7. Install a new oil filter.
(Refer to the descriptions for
3
Replace Engine Oil
Filter.)
8. Securely tighten drain plug (3).
9. Remove oil filler cap (2). Supply the specified amount of
approved engine oil. Refer to "Recommended Engine
Oil" on page 7-17.
25 liters (6.6 gallons)
10. Check that the oil level is between the maximum and
minimum level scales on oil level gauge (1). Then, start
the engine.
11. After starting the engine, check the sealing surfaces for
any oil leakage.
12. Keep the engine running at low idle speed for 5 minutes
and stop the engine. About 15 minutes later, recheck the
oil level. If necessary, add oil.
Clean cloth
Container
M4GB-07-020
MNEC-07-073
2
1
To Next Page
Loading...