KCM 70Z7 - Page 297

MAINTENANCE
7-56
Table 2. Lines
Interval (hours) Check Points Abnormalities Remedies
Daily Contact surfaces of
flange joints
Bolts
Leak (11)
Loose or leak (11)
Replace
O-ring and/or
retighten bolts
Welded surfaces on
flange joints
Leak (12) Replace
Every 250 hours Flange joint neck Crack (13) Replace
Welded surfaces on
flange joints
Crack (12) Replace
Clamps Missing Replace
Deformation Replace
Loose Retighten

NOTE: Refer to the illustrations in Fig. 2 for each check point location or for a description of
the abnormality. Use genuine Kawasaki parts.
M4GB-07-059
M4GB-07-060
12
13
12
Fig. 2
13
11