OPERATOR'S STATION
1-37
Keep pressing switch (1).
Remaining hours
before replacement
is displayed.
Release switch (1) to complete resetting operation.
Time display is changed four
seconds after pressing switch (1).
y Fuel filter replacement interval hour meter
Filter replacement intervals can be reset to “500.0” or “250.0”.
The interval set when the machine was shipped from the
factory is “500.0”.
While displaying the replacement interval hours, keep
pressing switch (1).
NOTE: When switch (1) is released, time resetting is
completed. Keep pressing switch (1) until the desired resetting
time is displayed.
Time display is changed four seconds after pressing switch
(1). While keeping switch (1) pressed, press switch (3). Each
time switch (3) is pressed, the displayed hours will change in
the order of “500.0 J 250.0”.
When the desired time is displayed, release switch (1) to
complete resetting operation.
Alternate display
MNDB-01-008
32 1
Press button
Press button
MNDB-01-050
To Next Page
Loading...