*RCL {0|1|2|3|4} States 1, 2, 3, and 4 are user-defined states.
To assign a custom name to a stored state to be recalled from the front
panel, send the following command. From the remote interface, you can only
recall a stored state using a number (0 through 4).
MEMory:STATe:NAME {1|2|3|4}, name
MEM:STATE:NAME 1,TEST_WFORM_1
To configure the 81150A / 81160A to automatically recall the power-down
state when power is restored, send the following command:
MEMory:STATe:RECall:AUTO ON
To Next Page
Loading...
