Keysight 81150A - Page 325

Remote Programming Reference
81150A and 81160A User’s Guide 325
Command
:APPL[1|2]:RAMP
Long
:APPLy[1|2]:RAMP
Parameters
[<frequency>[,<amplitude>[,<offset>]]]
Parameter Suffix

Description
Output a ramp wave with the specified frequency, amplitude, and dc offset.
This command overrides the current symmetry setting and automatically
selects 100%. The waveform is output as soon as the command is executed.
Example
:APPL:RAMP 4MHz, 3.42, 0.1