Keysight 81150A - Page 432

Appendix
432
Output Function Commands
Command
:FREQ[1|2][?]
Long
[:SOURce]:FREQuency[1|2][:CW|:FIXed][?]
Parameters
{<NR3>|MINimum|MAXimum}
Parameter Suffix
HZ
Description
Set the output frequency. The :FREQ[1|2]? query returns the frequency
setting in Hertz for the function currently selected. MIN selects the lowest
actual possible frequency allowed for the selected function. MAX selects
the highest actual possible frequency allowed.
Example
:FREQ 1.234MHZ