Keysight 81150A - Page 433

Remote Programming Reference
81150A and 81160A User’s Guide 433
Command
:FUNC[1|2][?]
Long
[:SOURce]:FUNCtion[1|2][:SHAPe][?]
Parameters
{SINusoid|SQUare|RAMP|PULSe|NOISe|DC|USER}
Parameter Suffix

Description
Select the output function. The selected waveform is output using the
previously selected frequency, amplitude, and offset voltage settings. The
FUNC[1|2]? query returns “SIN”, “SQU”, “RAMP”, “PULS”,
“NOIS”, “DC”, or “USER” (without “”)
If you select “USER”, the instrument outputs the arbitrary waveform
currently selected by the FUNC[1|2]:USER command.
SINusoid
Output a sine wave
SQUare
Output a square wave
RAMP
Output a ramp wave
PULSe
Output a pulse wave
NOISe
Output Gaussian noise
DC
Output a dc voltage
USER
Output the arbitrary waveform
Example
:FUNC1 SIN