Keysight 81150A - Page 462

Appendix
462
Command
:PULS:TRAN[1|2]:TRA:AUTO[?]
Long
[:SOURce]:PULSe:TRANsition[1|2]:TRAiling:AUTO[?]
Parameters
{OFF|ON|ONCE}
Parameter Suffix

Description
It’s used to set the automatic coupling of the pulse-trailing-edge transition
time to the leading-edge transition time.
ON
The trailing-edge transition time is automatically set to the
same value as the leading edge and is updated automatically
each time the leading-edge transition time changes.
OFF
The trailing-edge/leading-edge transition time is
independently programmable.
ONCE
The trailing-edge transition time is set ONCE to the same
value as the leading edge.
Example
:PULS:TRAN1:TRA:AUTO OFF