Keysight 81150A - Page 463

Remote Programming Reference
81150A and 81160A User’s Guide 463
Command
:PULS:TRAN[1|2]:UNIT[?]
Long
[:SOURce]:PULSe:TRANsition[1|2]:UNIT[?]
Parameters
{S|SEC|PCT}
Parameter Suffix

Description
Use this command to set the default units for the pulse transition-times. The
default unit is used when the parameter is programmed to a value without a
unit suffix.
Example
:PULS:TRAN2:UNIT PCT