Keysight 81150A - Page 558

Appendix
558
Command
:DIG:TRAN:SEL
Long
:DIGital[1|2][:STIMulus][:PATTern]:TRANsition
:SELect
Parameters
<name>
Parameter Suffix
-
Description
Use this command to select a named bit transition waveform. The name can
be a user-defined pattern name that has been stored with
:DIG:TRAN:COPY before or the name VOLATILE to select the bit
transition waveform that is currently in volatile memory.
Example
:DIG:TRAN:SEL MY_WAVEFORM