Keysight 81150A - Page 563

Remote Programming Reference
81150A and 81160A User’s Guide 563
Command
:DIG:TRIG
Long
:DIGital[1|2][:STIMulus][:PATTern]:TRIGger[:MODE]
Parameters
BIT|BLOCk
Parameter Suffix
-
Description
Use this command to select the trigger mode for pattern. If it is set to BIT,
each trigger event causes a single bit to be output. If set to BLOCK, each
trigger event will cause a complete data block to be output.
Example
:DIG:TRIG BLOCk