Keysight 81150A - Page 564

Appendix
564
Command
:DIG:SOUR
Long
:DIGital[1|2][:STIMulus][:PATTern]:SOURce
Parameters
INTernal|EXTernal
Parameter Suffix
-
Description
Use this command to select the pattern source. In INTernal mode, one of the
built-in or user-defined patterns or a PRBS can be selected. In EXTernal
mode, pattern data is supplied on the MOD-IN connector on the rear-panel
of the 81150A / 81160A.
See also :DIG:EXT:IMP, :DIG:EXT:RANG, :DIG:EXT:THR,
:DIG:EXT:SAMP.
Example
:DIG:SOUR EXT