Keysight 81150A - Page 566

Appendix
566
Command
:DIG:EXT:IMP
Long
:DIGital[1|2][:STIMulus][:PATTern]:EXTernal
:IMPedance
Parameters
<nr3>
Parameter Suffix
-
Description
Specifies the input impedance for the external pattern input (i.e. the
modulation input on the rear panel). Valid values are 50 Ohm and 10 kOhm.
Any other value will be rounded to one of the two possible values.
Example
:DIG:EXT:IMP 50