Keysight 81160A - Page 136

Appendix
136
Input Impedance
Introduction
When selecting external modulation source, impedance of the Modulation-
In connector can be selected between 50  and 10 k.
Front Panel
Operation
Press the MOD-IN softkey to go to the Modulation In screen.
Press the Impedance softkey.
Remote Interface
Operation
:FSKey[1|2]:EXTernal:IMPedance{<ohms>|MINimum|
MAXimum}
:AM[1|2]:EXTernal:IMPedance{<ohms>|MINimum|
MAXimum}
:FM[1|2]:EXTernal:IMPedance{<ohms>|MINimum|
MAXimum}
:PM[1|2]:EXTernal:IMPedance{<ohms>|MINimum|
MAXimum}
:PWM[1|2]:EXTernal:IMPedance{<ohms>|MINimum|
MAXimum}
:FSK[1|2]:EXTernal:IMPedance{<ohms>|MINimum|
MAXimum}