Remote Programming Reference
81150A and 81160A User’s Guide 343
VOLATILE <value>, <value>, <value>, …}
Addresses the internal 16K (16384) modulation memory. It can be used to
download an arbitrary waveform into the modulation memory which can be
used as modulating waveform for a signal generated by the instrument. It
corresponds to the DATA[1|2] commands which loads the VOLATILE
memory of the instrument. For a more detailed description of the data
format, refer to :DATA VOLATILE SCPI command or Appendix of this
document.
:DATA:MOD VOLATILE, 0.2, 1.0, -1.0, 0.5, -0.75
To Next Page
Loading...
