Keysight 81160A - Page 344

Appendix
344
Command
:DATA[1|2]:MOD:DAC
Long
:DATA[1|2]:MODulation:DAC
Parameters
{VOLATILE,<binary block>|<value>, <value>, <value>, …}
Parameter Suffix

Description
Addresses the internal 16K (16384) modulation memory. It can be used to
download an arbitrary waveform into the modulation memory which can be
used as modulating waveform for a signal generated by the instrument. It
corresponds to the DATA[1|2] … and DATA[1|2]:DAC …
commands which loads the VOLATILE memory of the instrument. For a more
detailed description of the data format, refer to :DATA:DAC VOLATILE
SCPI command or Appendix of this document.
Example
:DATA:MOD:DAC VOLATILE,#1801020304
:DATA:MOD:DAC VOLATILE,8187, 4098, 0, -4096, -8187