Keysight 81160A - Page 491

Remote Programming Reference
81150A and 81160A User’s Guide 491
Command
:FREQ[1|2]:STAR[?]
Long
[:SOURce]:FREQuency[1|2][:CW|:FIXed]:STARt[?]
Parameters
{<NR3>|MINimum|MAXimum}
Parameter Suffix
HZ
Description
Set the start frequency (used in conjunction with the stop frequency. The
:FREQ[1|2]:STAR? query returns the start frequency in Hertz. To
sweep up in frequency, set the start frequency < stop frequency. To sweep
down in frequency, set the start frequency > stop frequency.
Example
:FREQ2:STAR 10.1MHZ