Keysight 81160A - Page 492

Appendix
492
Command
:FREQ[1|2]:STOP[?]
Long
[:SOURce]:FREQuency[1|2][:CW|:FIXed]:STOP[?]
Parameters
{<NR3>|MINimum|MAXimum}
Parameter Suffix
HZ
Description
Set the stop frequency (used in conjunction with the start frequency). The
:FREQ[1|2]:STOP? query returns the stop frequency in Hertz.
Example
:FREQ2:STOP 15.1MHZ