Keysight 81160A - Page 531

Remote Programming Reference
81150A and 81160A User’s Guide 531
Command
:ARM:SENS[1|2][?]
Long
:ARM[:SEQuence[1]|STARt][:LAYer[1]]:SENSe[1|2][?]
Parameters
{EDGE|LEVel}
Parameter Suffix

Description
Use this command to select triggered or gated mode by choosing whether
the instrument arms on the edge(s) or level of the trigger signal. To select
the external input as trigger source use :ARM:SOUR[1|2] EXT
Example
:ARM:SENS2 LEV