Keysight 81160A - Page 533

Remote Programming Reference
81150A and 81160A User’s Guide 533
Command
:ARM:SOUR[1|2][?]
Long
:ARM[:SEQuence[1]|[STARt][:LAYer[1]]:
SOURce[1|2][?]
Parameters
{IMMediate|INTernal[1]|INTernal[2]|EXTernal|BUS|
MANual}
Parameter Suffix

Description
Use this command to select the triggering mode of the instrument by
selecting the source of the arming signal for the specified channel of the
instrument.
IMMediate|INTernal1
Continuous mode
INTernal2
Triggered by the internal trigger period
generator
EXTernal
Triggered or Gated by External Input
(EXT-IN)
MANual
Triggered or Gated by the manual key or
by *TRG|:TRIGger
 If the mode IMM of INT1 was sent, the query form returns always IMM.
Example
:ARM:SOUR2 IMM